ASTM D1384 Test Specimen Set
Test specimen sets & assemblies used in ASTM D1384 (Corrosion Test for Engine Coolants in Glassware). This test is used to measure the effect of engine coolants on metal test specimens that are similar to the metals present in automotive engines. The same set of specimens are used for ASTM D2570.
ASTM D1384 test specimens are 1 x 2 inches and have a 17/64-inch center hole. Most specimens are 1/16-inch thick, except for cast aluminum and cast iron, which are 1/8-inch thick. ASTM D1384 specimens are typically serial-numbered, pre-weighed, assembled, and packaged in VCI.
ASTM D1384 also allows alternate or modified test specimens.
The standard ASTM D1384 test specimen set includes:
Steel (UNS G10200, SAE 1020) specimen
Copper (UNS C110000, SAE CA110) specimen
Brass (UNS C26000, SAE C260) specimen
Solder-coated brass (C260 brass coated with Grade 30A solder) specimen
Pure solder Grade 30A specimen is optional replacement (Contact for purchase & pricing)
Cast aluminum (UNS A23190, SAE 326) (1/8" thick)
Cast iron (SAE G3500) (1/8" thick)
**Please contact for current availability and lead time
Test specimen sets & assemblies used in ASTM D1384 (Corrosion Test for Engine Coolants in Glassware). This test is used to measure the effect of engine coolants on metal test specimens that are similar to the metals present in automotive engines. The same set of specimens are used for ASTM D2570.
ASTM D1384 test specimens are 1 x 2 inches and have a 17/64-inch center hole. Most specimens are 1/16-inch thick, except for cast aluminum and cast iron, which are 1/8-inch thick. ASTM D1384 specimens are typically serial-numbered, pre-weighed, assembled, and packaged in VCI.
ASTM D1384 also allows alternate or modified test specimens.
The standard ASTM D1384 test specimen set includes:
Steel (UNS G10200, SAE 1020) specimen
Copper (UNS C110000, SAE CA110) specimen
Brass (UNS C26000, SAE C260) specimen
Solder-coated brass (C260 brass coated with Grade 30A solder) specimen
Pure solder Grade 30A specimen is optional replacement (Contact for purchase & pricing)
Cast aluminum (UNS A23190, SAE 326) (1/8" thick)
Cast iron (SAE G3500) (1/8" thick)
**Please contact for current availability and lead time
Test specimen sets & assemblies used in ASTM D1384 (Corrosion Test for Engine Coolants in Glassware). This test is used to measure the effect of engine coolants on metal test specimens that are similar to the metals present in automotive engines. The same set of specimens are used for ASTM D2570.
ASTM D1384 test specimens are 1 x 2 inches and have a 17/64-inch center hole. Most specimens are 1/16-inch thick, except for cast aluminum and cast iron, which are 1/8-inch thick. ASTM D1384 specimens are typically serial-numbered, pre-weighed, assembled, and packaged in VCI.
ASTM D1384 also allows alternate or modified test specimens.
The standard ASTM D1384 test specimen set includes:
Steel (UNS G10200, SAE 1020) specimen
Copper (UNS C110000, SAE CA110) specimen
Brass (UNS C26000, SAE C260) specimen
Solder-coated brass (C260 brass coated with Grade 30A solder) specimen
Pure solder Grade 30A specimen is optional replacement (Contact for purchase & pricing)
Cast aluminum (UNS A23190, SAE 326) (1/8" thick)
Cast iron (SAE G3500) (1/8" thick)
**Please contact for current availability and lead time
